|Number of page(s)||15|
|Published online||04 April 2019|
Comparison on various machinability aspects between mixed and reinforced ceramics when machining hardened steels
1Mechanics and Structures Laboratory (LMS),8 May University of Guelma,BP.401,24000 Guelma,Algeria
2National High School of Technology (ENST),Dergana,Algiers,Algeria
3Department of Mechanical Engineering,Faculty of Technology Sciences,University of Mentouri Brothers Constantine,P.O.Box 325,Ain-El-Bey Way,Constantine 25017,Algeria
4Advanced Technologies in Mechanical Production Research Laboratory (LRTAPM),Badji Mokhtar University of Annaba,阿纳巴,Algeria
Received:8 March 2015
Accepted:28 December 2018
The hard turning process has an attracting interest in different industrial sectors for finishing operations of hard materials.However,it still presents disadvantages with respect to process capability and reliability.This paper describes a comparison of surface roughness,specific cutting force and flank wear between mixed ceramic CC650 (Al2O3(70%) + TiC (30%)) and reinforced ceramic CC670 (Al2O3(75%) + SiC (25%)) cutting tools when machining in dry hard turning of AISI 4140,treated at 52 HRC using the response surface methodology (RSM).A mathematical prediction model of the machining responses has been developed in terms of cutting speed,feed rate and cutting time parameters.Experimental observations show that the surface roughness obtained with the mixed ceramic insert significantly improved when compared with reinforced ceramic insert with a ratio of 1.44.In the same way,insert CC650 has better performance compared to reinforced ceramic inserts CC670,in terms of the specific cutting force and flank wear.
Key words:Hard turning / AISI 4140 steel / ceramic / cutting parameters / ANOVA / RSM
© AFM,EDP Sciences 2019
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views,PDF and ePub downloads,according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015.The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.