Open Access
yabo亚博Issue
yabo亚博
Volume14,数 ,二千零一十三
第页 413-429年
DOI https://doi.org/10.1051/meca/2013087
在线发布 2014年2月14日
  1. R.理查森,R.巴蒂,导板在BTA深孔加工中的作用研究综述,JMater.Process.Technol.110(2001)61−69[CrossRef] [谷歌学者]
  2. JJungJ镍,预测炮击过程中的冷却剂压力和体积流量,JManuf.SCI。Eng.125 (2003) 696−702[CrossRef] [谷歌学者]
  3. JFrazao,S.Chandrashekhar,M.O.M.Osman,T.S.桑卡,On the design and development of a new BTA Tool to increase productivity and workpiece accuracy in deep hole machining,INTJ副词。Manuf.Technol.1(1986)3−23[CrossRef] [谷歌学者]
  4. B.JGriffiths,An investigation into the role of the burnishing pads in the deep hole drilling process,博士学位thesis of Brunel University (1982)[谷歌学者]
  5. B.JGriffiths,深孔钻削,生产工程师(1975)98-105[谷歌学者]
  6. K樱木,KTaguchi,a.Katsuki,H.Takeyama,深孔钻具的自导向作用,CIRP Annals – Manuf.Technol.30 (1981) 311−315[CrossRef] [谷歌学者]
  7. K樱木,KTaguchi,a.Katsuki,固体钻具深孔钻削研究——导向垫的抛光作用及其对孔精度的影响,Bull.日本SOC。Mech.Eng.23 (1980) 1921−1928[CrossRef] [谷歌学者]
  8. K樱木,KTaguchi,S.Kinjo,固体钻削工具深孔的研究——刀具材料对切削性能的影响,Bull.日本SOC。Mech.Eng.21(1978)532−542[CrossRef] [谷歌学者]
  9. M.C.ShawC.J.Oxford,关于金属的钻孔——钻孔中的扭矩和推力,反式ASME 79 (1957) 139−148[谷歌学者]
  10. W泰斯OWebber,C.Weihs,统计数据,动态和质量-改进BTA深孔钻削“,Technical Report 6/2004 of the SFB 475,多特蒙德大学(2004)[谷歌学者]
  11. M.Al-Ata,M.T.Hayajneh,研究了自导向工具精密孔加工中的喇叭口问题。INTJ副词。Manuf.Technol.43 (2009) 22−32[CrossRef] [谷歌学者]
  12. KWeinert,T布鲁豪斯,对自动导向钻井工具操作行为的摩擦学研究,Wear 225−229 (1999) 925−935[CrossRef] [谷歌学者]
  13. C.S.Deng,J.H.ChinBTA钻削中的圆度误差及其长钻轴共振强迫振动引起的波状和波瓣模型,JManuf.SCI。Eng.126 (2004) 524−534[CrossRef] [谷歌学者]
  14. C.S.Deng,J.C.黄J.H.ChinEffects of support misalignments in deep-hole drill shafts on hole straightness,INTJMach.Tools Manuf.41 (2001) 1165−1188[CrossRef] [谷歌学者]
  15. a.Al-Hamdan,Effect of misalignment on the cutting force signature in drilling,JMater.Process.Technol.124(2002)83-91[CrossRef] [谷歌学者]
  16. C.S.Deng,J.H.Chin用田口方法分析深孔钻削中的孔圆度,INTJ副词。Manuf.Technol.25 (2005) 420−426[CrossRef] [谷歌学者]
  17. n.名词Guibert,H.Paris,J雷希A numerical simulator to predict the dynamical behavior of the self-vibratory drilling head,INTJMach.Tools Manuf.48 (2008) 644−655[CrossRef] [谷歌学者]
  18. KWeinert,OWebber,C.Peters,在BTA深孔钻削中,钻深依赖模态阻尼对颤振的影响。CIRP Ann.– Manuf.Technol.54(2005)363−366[CrossRef] [谷歌学者]
  19. KWeinert,OWebber,M.Hüsken,J梅恩,W泰斯BTA深孔钻削过程动态干扰分析与预测,Proceedings of the Third CIRP International Seminar on Intelligent Comput.Manuf.Eng.(2002) 297−302[谷歌学者]
  20. KWeinert,OWebber,M.Hüsken,J梅恩,Statistics and time series analyses of BTA deep hole drilling,International Conference on Non-linear Dynamics in Mechanical Processing,2001[谷歌学者]
  21. a.Messaoud,C.Weihs,利用非线性时间序列模型监测深孔钻削过程,JSound Vib.321(2009)620-630[CrossRef] [谷歌学者]
  22. a.Messaoud,C.Weihs,F.赫林,Detection of chatter vibration in a drilling process using multivariate control charts,Comput.斯达。数据分析。52 (2008) 3208−3219[CrossRef] [谷歌学者]
  23. D。Biermann,a.Sacharow,K沃尔杰默斯,Simulation of the BTA deep-hole drilling process,Prod.Eng.物件。德文3 (2009) 339−346[CrossRef] [谷歌学者]
  24. n.名词拉伯OWebber,W泰斯Spiralling in BTA deep-hole drilling: models of varying frequencies,从数据和信息分析到知识工程,Studies in Classification,Data Analysis,和知识组织(2006)510-517[谷歌学者]
  25. V.P.Astakhov,M.O.M.Osman,利用平行边界剪切带模型对自导向钻井中的切削力进行了分析评价。Part 1: Theory,International J.Machine Tools Manuf.36 (1996) 1187−1200[CrossRef] [谷歌学者]
  26. V.P.Astakhov,M.O.M.Osman,利用平行边界剪切带模型对自导向钻井中的切削力进行了分析评价。Part 2: Application,INTJMachine Tools Manuf.36(1996)1335−1345[CrossRef] [谷歌学者]
  27. F.基亚JNib,D.A.斯蒂芬森,Chip thickening in deep-hole drilling,INTJMachine Tools Manuf.46 (2005) 1500−1507[谷歌学者]
  28. F.基亚JNib,D.A.斯蒂芬森,Continuous chip formation in drilling,INTJMachine Tools Manuf.45 (2005) 1652−1658[CrossRef] [谷歌学者]
  29. C.H.Gao,KCheng,D。柯克伍德,The investigation on the machining process of BTA deep hole drilling,JMater.Process.Technol.107(2000)222−227[CrossRef] [谷歌学者]
  30. JThil,C.巴利埃,B.Haddag,饲料简介:工艺技术与研究,杂志设备产品36(2012)[谷歌学者]
  31. R.Komanduri,R.H.Brown,On the mechanics of chip segmentation in machining,JEng.工业103(1981)33−51[CrossRef] [谷歌学者]
  32. JBarry,G.拜恩D。列侬,Observations on chip formation and acoustic emission in machining Ti-6Al-4V Alloy,INTJMach.Tools Manuf.41(2001)1055−1070[CrossRef] [谷歌学者]
  33. J.D.Puerta Velásquez,B.Bolle,P.Chevrier,G.Geandier,a.Tidu,钛-6 wt.%铝-4 wt.%钒合金高速切削切屑的冶金研究,Mater.SCI。Eng.A 452−453(2007)469−474[CrossRef] [谷歌学者]
  34. 是的。Wang,B.锂,G.Tu,The study on the chip formation and wear behavior for drilling forged steel S48CS1V with TiAlN-coated gun drill,INTJ折射。金属硬材料。30(2012)200−207[CrossRef] [谷歌学者]
  35. S.亚特兰蒂斯,B.Haddag,M.Nouari,M.Zenasni,Analysis of a new Segmentation Intensity Ratio "SIR" to characterize the chip segmentation process in machining ductile metals,INTJMach.Tools Manuf.51(2011)687−700[CrossRef] [谷歌学者]
  36. S.Kouadri,KNecib,S.亚特兰蒂斯,B.Haddag,M.Nouari,金属加工中切屑分割的量化:应用硬质合金刀具WC-CO加工航空铝合金AA2024-T351。INTJMach.Tools Manuf.64 (2013) 102−113[谷歌学者]
  37. M.Cotterell,G.拜恩Characterisation of chip formation during orthogonal cutting of titanium alloy TI-6Al-4V,CIRP J.Manuf.SCI。Technol.1 (2008) 81−85[CrossRef] [谷歌学者]
  38. 麻省理工学院戴维斯,T.JBurns,C.J.伊万斯对硬质合金加工中切屑形成的动力学研究,Ann.CLRP 46(1997)25-30[CrossRef] [谷歌学者]
  39. 麻省理工学院戴维斯,是的。Chou,C.J.伊万斯片内形态,精硬车削中的刀具磨损和切削机理,Ann.ClRP 45 (1996) 77−82[CrossRef] [谷歌学者]
  40. L.Zhanqiang,S.国生,Characteristics of chip evolution with elevating cutting speed from low to very high,INTJMach.Tools Manuf.54−55 (2012) 82−85[CrossRef] [谷歌学者]
  41. S.Sun,M.勃兰特,M.S.Dargusch,Characteristics of cutting forces and chip formation in machining of titanium alloys,INTJMach.Tools Manuf.49(2009)561–568[CrossRef] [谷歌学者]
  42. a.阿卡万·法里德,S.Sharif,M.H.伊德里斯铝硅合金高速钻削切屑形貌研究,INTJ副词。Manuf.Technol.57(2011)555−564[CrossRef] [谷歌学者]
  43. JBarry,G.拜恩加工硬化钢的切屑形成机制,JManuf.SCI。Eng.124(2002)528−535[CrossRef] [谷歌学者]
  44. A.E.Bayoumi,J.Q.解切削Ti-6 wt%Al-4 wt%V合金时切屑形成的一些冶金方面,Mater.SCI。Eng.A 190(1995)173−180[CrossRef] [谷歌学者]
  45. M.C.Shawa.VyasThe mechanism of chip formation with hard turning steel,CIRP Ann.Manuf.Technol.47(1998)77−82[CrossRef] [谷歌学者]
  46. V.P.Astakhov,S.Shvets,The assessment of plastic deformation in metal cutting,J材料工艺。Technol.146(2004)193−202[CrossRef] [谷歌学者]
  47. SANDVIK Coromant,深孔钻探,Product catalogue and application guide (2003)[谷歌学者]
  48. S.R.波尔多,B.唐古伊,JBesson,S.BugatD。莫尼罗,a.Pineau,Cleavage fracture of RPV steel following warm pre-stressing: micromechanical analysis and interpretation through a new model,疲劳断裂。Engng.Mater.Struct.29(2006)799−816[CrossRef] [谷歌学者]
  49. M.Hajjaj,Propagation dynamique et arrêt de fyabo亚博issure de clivage dans un acier bainitique,博士学位thesis of Ecole Centrale Paris 2006[谷歌学者]
  50. M.Hajjaj,C.Berdin,P.邦帕,S.Bugat解理止裂实验分析:试件振动的影响,Eng.Fracture Mech.75 (2008) 1156−1170[CrossRef] [谷歌学者]
  51. B.维雷克,我们分析了事故严重时,事故发生概率的家族成员,博士学位巴黎第六大学论文,2004[谷歌学者]
  52. v.诉Le Corre,复合断裂韧性:在酸性C-Mn和Leurs接头溶液中的管道上应用a tenue mecanique des tubes en acier C-Mn et de Leurs soudes,博士学位中央经济学院论文,2006[谷歌学者]
  53. e.Merchant,金属切削过程的基本力学,JApp.机械,反式ASME 66(1944)A-168[谷歌学者]
  54. C.巴利埃,使用Mat_riaux M_Talliques,Memotech Plus,工业化和M_Canique,卡斯蒂利亚出版社,国际标准书号:978−2-7135−2703−6 2010,国际标准编号:0986−4024[谷歌学者]

当前使用度量显示文章视图的累积计数(包括HTML视图在内的全文文章视图,PDF and ePub downloads,according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015.The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.